Features:
- Principle of operation-Component Gear is run with its Mating Gear set at assembly centre distance.
- Constructed with graded seasoned CI Casting.
- ACVD controlled induction motor drives Mating Gear at steplessly variable speed displayed on digital speed indicator.
- Component Gear in mesh is brake - loaded for single flank contact for sensing meshing noise.
- Electro-discharge deburring cycle to remove high spots on flank.
|
Technical Specifications:
| Description | Specification |
|---|
| Max OD of Work piece Gear | 250mm |
| Work piece Min Length | 150mm |
| Work piece Max Length | 350mm |
| Min Mating Centre Distance | 60mm |
| Max Mating Centre Distance | 135mm |
| Work Piece Max wt. (#) | 5 Kg For bore type gears and 10 Kg for Shaft type gears. |
| Centre Height | 126mm |
| Driving Gear speed range | 500 - 3000 RPM |
| Main Motor specification | 3Ø 3.0 HP 2880 RPM AC Induction Motor. |
| Reciprocation Arrangement | Fixed Speed with off-line variable stroke (7 - 15 mm.) |
|
Gear Noise Tester
